[GH-ISSUE #366] [Feature]: "backend.app.services.bambu_mqtt" logging options #229

New issue

Closed

opened 2026-05-06 12:27:27 +02:00 by BreizhHardware · 1 comment

BreizhHardware commented

2026-05-06 12:27:27 +02:00

Owner

Originally created by @JasonSwindle on GitHub (Feb 13, 2026).
Original GitHub issue: https://github.com/maziggy/bambuddy/issues/366

Originally assigned to: @maziggy on GitHub.

Problem or Use Case

My logs are FULL of backend.app.services.bambu_mqtt activity, and I would love to limit the MQTT logging.

2026-02-13 17:50:31,084 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:31,084 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:31,085 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:31,086 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:32,113 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:32,115 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:32,116 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:32,117 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:32,117 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:33,220 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:33,221 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:33,222 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:33,222 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:33,222 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:34,236 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:34,237 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:34,238 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:34,239 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:34,239 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:35,439 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:35,440 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:35,440 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:35,441 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:35,441 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:35,663 INFO [backend.app.main] Recorded 1 AMS sensor history entries
2026-02-13 17:50:36,559 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:36,561 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:36,562 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:36,563 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:36,564 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:37,550 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:37,551 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:37,552 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:37,552 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:37,553 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:38,700 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:38,700 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:38,701 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:38,701 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:38,702 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:39,473 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:39,473 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:39,474 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:39,474 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:39,475 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:40,589 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:40,590 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:40,590 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:40,591 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:40,591 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:41,568 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:41,569 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:41,571 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:41,571 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:41,572 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm
2026-02-13 17:50:42,633 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
2026-02-13 17:50:42,634 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode
2026-02-13 17:50:42,635 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0)
2026-02-13 17:50:42,636 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}]
2026-02-13 17:50:42,637 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm

Proposed Solution

Give me logging options for MQTT like [WARN, notice, info, debug, disable] and so on.

Alternatives Considered

No response

Feature Category

Other

Priority

Nice to have

Mockups or Examples

No response

Contribution

I would be willing to help implement this feature

Checklist

I have searched existing issues to ensure this feature hasn't already been requested

Originally created by @JasonSwindle on GitHub (Feb 13, 2026). Original GitHub issue: https://github.com/maziggy/bambuddy/issues/366 Originally assigned to: @maziggy on GitHub. ### Problem or Use Case My logs are FULL of `backend.app.services.bambu_mqtt` activity, and I would love to limit the MQTT logging. ``` 2026-02-13 17:50:31,084 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:31,084 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:31,085 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:31,086 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:32,113 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:32,115 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:32,116 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:32,117 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:32,117 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:33,220 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:33,221 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:33,222 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:33,222 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:33,222 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:34,236 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:34,237 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:34,238 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:34,239 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:34,239 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:35,439 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:35,440 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:35,440 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:35,441 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:35,441 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:35,663 INFO [backend.app.main] Recorded 1 AMS sensor history entries 2026-02-13 17:50:36,559 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:36,561 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:36,562 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:36,563 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:36,564 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:37,550 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:37,551 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:37,552 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:37,552 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:37,553 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:38,700 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:38,700 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:38,701 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:38,701 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:38,702 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:39,473 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:39,473 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:39,474 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:39,474 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:39,475 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:40,589 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:40,590 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:40,590 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:40,591 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:40,591 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:41,568 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:41,569 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:41,571 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:41,571 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:41,572 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm 2026-02-13 17:50:42,633 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True} 2026-02-13 17:50:42,634 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: flow_rate_fine_calib_mode 2026-02-13 17:50:42,635 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] device.extruder.state=2 (switch_state bits 12-14: 0) 2026-02-13 17:50:42,636 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] HMS data received: [{'attr': 83887360, 'code': 65543}] 2026-02-13 17:50:42,637 INFO [backend.app.services.bambu_mqtt] [31B8AP5B2100046] wifi_signal received: -61dBm ``` ### Proposed Solution Give me logging options for MQTT like [WARN, notice, info, debug, disable] and so on. ### Alternatives Considered _No response_ ### Feature Category Other ### Priority Nice to have ### Mockups or Examples _No response_ ### Contribution - [ ] I would be willing to help implement this feature ### Checklist - [x] I have searched existing issues to ensure this feature hasn't already been requested

BreizhHardware

2026-05-06 12:27:27 +02:00

closed this issue
added the
enhancement
label

BreizhHardware commented

2026-05-06 12:27:28 +02:00

Author

Owner

@maziggy commented on GitHub (Feb 15, 2026):

Fixed in branch 0.2.0b.

If you find Bambuddy useful, please consider giving it a ⭐ on GitHub — it helps others discover the project!

@maziggy commented on GitHub (Feb 15, 2026): Fixed in branch 0.2.0b. ----- If you find Bambuddy useful, please consider giving it a ⭐ on [GitHub](https://github.com/bambuman/bambuddy) — it helps others discover the project!

BreizhHardware referenced this issue

2026-05-06 12:34:14 +02:00

[PR #236] [MERGED] Feature/slicer proxy #966

BreizhHardware referenced this issue

2026-05-06 12:34:15 +02:00

[PR #237] [MERGED] v0.1.7b #969

BreizhHardware referenced this issue

2026-05-06 12:34:21 +02:00

[PR #282] [MERGED] v0.1.8 #986

BreizhHardware referenced this issue

2026-05-06 12:34:22 +02:00

[PR #281] [CLOSED] v0.1.8 #989