[GH-ISSUE #978] [Bug Report] File not printed. Sending a file to P1P. Uploading. No print start. Then as 100%

BreizhHardware commented

2026-05-06 12:31:53 +02:00

Owner

Originally created by @maziggy on GitHub (Apr 14, 2026).
Original GitHub issue: https://github.com/maziggy/bambuddy/issues/978

Originally assigned to: @maziggy on GitHub.

File not printed. Sending a file to P1P. Uploading. No print start. Then as 100% in Archives.

System Information

{
  "generated_at": "2026-04-14T19:47:13.614663",
  "app": {
    "version": "0.2.3b3",
    "debug_mode": false
  },
  "system": {
    "platform": "Linux",
    "platform_release": "6.8.0-106-generic",
    "platform_version": "#106-Ubuntu SMP PREEMPT_DYNAMIC Fri Mar  6 07:58:08 UTC 2026",
    "architecture": "x86_64",
    "python_version": "3.13.13"
  },
  "environment": {
    "docker": true,
    "data_dir": "/app/data",
    "log_dir": "/app/logs",
    "timezone": "Europe/Berlin"
  },
  "database": {
    "archives_total": 31,
    "archives_completed": 15,
    "printers_total": 3,
    "filaments_total": 0,
    "projects_total": 1,
    "smart_plugs_total": 0
  },
  "printers": [
    {
      "index": 1,
      "model": "P1S",
      "nozzle_count": 1,
      "is_active": true,
      "mqtt_connected": true,
      "state": "RUNNING",
      "firmware_version": "01.10.00.00",
      "wifi_signal": -42,
      "reachable": true,
      "ams_unit_count": 1,
      "ams_tray_count": 4,
      "has_vt_tray": true,
      "external_camera_configured": false,
      "plate_detection_enabled": false,
      "hms_error_count": 1,
      "developer_mode": true,
      "nozzle_rack_count": 0
    },
    {
      "index": 2,
      "model": "P1P",
      "nozzle_count": 1,
      "is_active": true,
      "mqtt_connected": true,
      "state": "FINISH",
      "firmware_version": "01.10.00.00",
      "wifi_signal": -46,
      "reachable": true,
      "ams_unit_count": 1,
      "ams_tray_count": 4,
      "has_vt_tray": true,
      "external_camera_configured": false,
      "plate_detection_enabled": false,
      "hms_error_count": 0,
      "developer_mode": true,
      "nozzle_rack_count": 0
    },
    {
      "index": 3,
      "model": "P1S",
      "nozzle_count": 1,
      "is_active": true,
      "mqtt_connected": true,
      "state": "RUNNING",
      "firmware_version": "01.10.00.00",
      "wifi_signal": -43,
      "reachable": true,
      "ams_unit_count": 1,
      "ams_tray_count": 4,
      "has_vt_tray": true,
      "external_camera_configured": false,
      "plate_detection_enabled": false,
      "hms_error_count": 0,
      "developer_mode": true,
      "nozzle_rack_count": 0
    }
  ],
  "settings": {
    "advanced_auth_enabled": "false",
    "smtp_auth_enabled": "true",
    "auth_enabled": "true",
    "setup_completed": "true",
    "auto_archive": "true",
    "save_thumbnails": "true",
    "capture_finish_photo": "true",
    "default_filament_cost": "25.0",
    "currency": "EUR",
    "energy_cost_per_kwh": "0.15",
    "energy_tracking_mode": "total",
    "disable_filament_warnings": "false",
    "check_updates": "true",
    "check_printer_firmware": "true",
    "include_beta_updates": "true",
    "notification_language": "en",
    "bed_cooled_threshold": "35.0",
    "ams_humidity_good": "40",
    "ams_humidity_fair": "60",
    "ams_temp_good": "28.0",
    "ams_temp_fair": "35.0",
    "ams_history_retention_days": "30",
    "queue_drying_enabled": "false",
    "queue_drying_block": "false",
    "ambient_drying_enabled": "false",
    "drying_presets": "",
    "per_printer_mapping_expanded": "true",
    "date_format": "system",
    "time_format": "system",
    "default_printer_id": "None",
    "ftp_retry_enabled": "true",
    "ftp_retry_count": "3",
    "ftp_retry_delay": "2",
    "ftp_timeout": "30",
    "mqtt_enabled": "false",
    "mqtt_broker": "",
    "mqtt_port": "1883",
    "mqtt_topic_prefix": "bambuddy",
    "mqtt_use_tls": "false",
    "ha_enabled": "false",
    "library_archive_mode": "ask",
    "library_disk_warning_gb": "5.0",
    "camera_view_mode": "window",
    "preferred_slicer": "bambu_studio",
    "prometheus_enabled": "false",
    "user_notifications_enabled": "true",
    "language": "en",
    "debug_logging_enabled": "false",
    "debug_logging_enabled_at": ""
  },
  "docker": {
    "container_memory_limit_bytes": null,
    "container_memory_limit_formatted": null,
    "network_mode_hint": "host"
  },
  "virtual_printers": [],
  "integrations": {
    "notification_providers": [],
    "spoolman": {
      "enabled": false,
      "reachable": false
    },
    "mqtt_relay": {
      "enabled": false,
      "connected": false,
      "broker": "",
      "port": 0,
      "topic_prefix": "bambuddy"
    },
    "homeassistant": {
      "enabled": false
    }
  },
  "database_health": {
    "backend": "sqlite",
    "journal_mode": "wal",
    "quick_check": "ok",
    "db_size_bytes": 737280,
    "wal_size_bytes": 4140632
  },
  "dependencies": {
    "fastapi": "0.135.3",
    "uvicorn": "0.44.0",
    "pydantic": "2.12.5",
    "sqlalchemy": "2.0.49",
    "paho-mqtt": "2.1.0",
    "psutil": "7.2.2",
    "httpx": "0.28.1",
    "aiofiles": "25.1.0",
    "cryptography": "46.0.7",
    "opencv-python-headless": "4.13.0.92",
    "numpy": "2.4.4"
  },
  "log_file": {
    "size_bytes": 3236028,
    "size_formatted": "3.1 MB"
  },
  "network": {
    "interface_count": 2,
    "interfaces": [
      {
        "name": "eno1",
        "subnet": "x.x.0.0/24"
      },
      {
        "name": "tailscale0",
        "subnet": "x.x.22.121/32"
      }
    ]
  },
  "websockets": {
    "active_connections": 1
  }
}

Logs (sanitized): bambuddy.log

Submitted via BamBuddy Bug Report

Originally created by @maziggy on GitHub (Apr 14, 2026). Original GitHub issue: https://github.com/maziggy/bambuddy/issues/978 Originally assigned to: @maziggy on GitHub. File not printed. Sending a file to P1P. Uploading. No print start. Then as 100% in Archives. <details> <summary>System Information</summary> ```json { "generated_at": "2026-04-14T19:47:13.614663", "app": { "version": "0.2.3b3", "debug_mode": false }, "system": { "platform": "Linux", "platform_release": "6.8.0-106-generic", "platform_version": "#106-Ubuntu SMP PREEMPT_DYNAMIC Fri Mar 6 07:58:08 UTC 2026", "architecture": "x86_64", "python_version": "3.13.13" }, "environment": { "docker": true, "data_dir": "/app/data", "log_dir": "/app/logs", "timezone": "Europe/Berlin" }, "database": { "archives_total": 31, "archives_completed": 15, "printers_total": 3, "filaments_total": 0, "projects_total": 1, "smart_plugs_total": 0 }, "printers": [ { "index": 1, "model": "P1S", "nozzle_count": 1, "is_active": true, "mqtt_connected": true, "state": "RUNNING", "firmware_version": "01.10.00.00", "wifi_signal": -42, "reachable": true, "ams_unit_count": 1, "ams_tray_count": 4, "has_vt_tray": true, "external_camera_configured": false, "plate_detection_enabled": false, "hms_error_count": 1, "developer_mode": true, "nozzle_rack_count": 0 }, { "index": 2, "model": "P1P", "nozzle_count": 1, "is_active": true, "mqtt_connected": true, "state": "FINISH", "firmware_version": "01.10.00.00", "wifi_signal": -46, "reachable": true, "ams_unit_count": 1, "ams_tray_count": 4, "has_vt_tray": true, "external_camera_configured": false, "plate_detection_enabled": false, "hms_error_count": 0, "developer_mode": true, "nozzle_rack_count": 0 }, { "index": 3, "model": "P1S", "nozzle_count": 1, "is_active": true, "mqtt_connected": true, "state": "RUNNING", "firmware_version": "01.10.00.00", "wifi_signal": -43, "reachable": true, "ams_unit_count": 1, "ams_tray_count": 4, "has_vt_tray": true, "external_camera_configured": false, "plate_detection_enabled": false, "hms_error_count": 0, "developer_mode": true, "nozzle_rack_count": 0 } ], "settings": { "advanced_auth_enabled": "false", "smtp_auth_enabled": "true", "auth_enabled": "true", "setup_completed": "true", "auto_archive": "true", "save_thumbnails": "true", "capture_finish_photo": "true", "default_filament_cost": "25.0", "currency": "EUR", "energy_cost_per_kwh": "0.15", "energy_tracking_mode": "total", "disable_filament_warnings": "false", "check_updates": "true", "check_printer_firmware": "true", "include_beta_updates": "true", "notification_language": "en", "bed_cooled_threshold": "35.0", "ams_humidity_good": "40", "ams_humidity_fair": "60", "ams_temp_good": "28.0", "ams_temp_fair": "35.0", "ams_history_retention_days": "30", "queue_drying_enabled": "false", "queue_drying_block": "false", "ambient_drying_enabled": "false", "drying_presets": "", "per_printer_mapping_expanded": "true", "date_format": "system", "time_format": "system", "default_printer_id": "None", "ftp_retry_enabled": "true", "ftp_retry_count": "3", "ftp_retry_delay": "2", "ftp_timeout": "30", "mqtt_enabled": "false", "mqtt_broker": "", "mqtt_port": "1883", "mqtt_topic_prefix": "bambuddy", "mqtt_use_tls": "false", "ha_enabled": "false", "library_archive_mode": "ask", "library_disk_warning_gb": "5.0", "camera_view_mode": "window", "preferred_slicer": "bambu_studio", "prometheus_enabled": "false", "user_notifications_enabled": "true", "language": "en", "debug_logging_enabled": "false", "debug_logging_enabled_at": "" }, "docker": { "container_memory_limit_bytes": null, "container_memory_limit_formatted": null, "network_mode_hint": "host" }, "virtual_printers": [], "integrations": { "notification_providers": [], "spoolman": { "enabled": false, "reachable": false }, "mqtt_relay": { "enabled": false, "connected": false, "broker": "", "port": 0, "topic_prefix": "bambuddy" }, "homeassistant": { "enabled": false } }, "database_health": { "backend": "sqlite", "journal_mode": "wal", "quick_check": "ok", "db_size_bytes": 737280, "wal_size_bytes": 4140632 }, "dependencies": { "fastapi": "0.135.3", "uvicorn": "0.44.0", "pydantic": "2.12.5", "sqlalchemy": "2.0.49", "paho-mqtt": "2.1.0", "psutil": "7.2.2", "httpx": "0.28.1", "aiofiles": "25.1.0", "cryptography": "46.0.7", "opencv-python-headless": "4.13.0.92", "numpy": "2.4.4" }, "log_file": { "size_bytes": 3236028, "size_formatted": "3.1 MB" }, "network": { "interface_count": 2, "interfaces": [ { "name": "eno1", "subnet": "x.x.0.0/24" }, { "name": "tailscale0", "subnet": "x.x.22.121/32" } ] }, "websockets": { "active_connections": 1 } } ``` </details> **Logs (sanitized):** [bambuddy.log](https://raw.githubusercontent.com/maziggy/bambuddy/bug-report-assets/logs/f6e3d3ece86248c09afa71c39b3fa441.log) --- *Submitted via BamBuddy Bug Report*

BreizhHardware

2026-05-06 12:31:53 +02:00

closed this issue
added the
invalid
label

BreizhHardware commented

2026-05-06 12:31:53 +02:00

Author

Owner

@maziggy commented on GitHub (Apr 14, 2026):

"network": {
"interface_count": 2,
"interfaces": [
{
> "name": "eno1",
"subnet": "x.x.0.0/24"

x.x.0.0/24 is not a valid IP address.

@maziggy commented on GitHub (Apr 14, 2026): > "network": { > "interface_count": 2, > "interfaces": [ > { > "name": "eno1", > "subnet": "x.x.0.0/24" x.x.0.0/24 is not a valid IP address.

BreizhHardware commented

2026-05-06 12:31:53 +02:00

Author

Owner

@tom5677 commented on GitHub (Apr 14, 2026):

Thank you for the swift reply. Where can I find this setting and change it? The same issue happened with other printer (P1P). Thanks

@tom5677 commented on GitHub (Apr 14, 2026): Thank you for the swift reply. Where can I find this setting and change it? The same issue happened with other printer (P1P). Thanks

BreizhHardware commented

2026-05-06 12:31:53 +02:00

Author

Owner

@maziggy commented on GitHub (Apr 14, 2026):

This is your operating system!

@maziggy commented on GitHub (Apr 14, 2026): This is your operating system!

BreizhHardware commented

2026-05-06 12:31:53 +02:00

Author

Owner

@tom5677 commented on GitHub (Apr 14, 2026):

It's a bit wired. Without changing anything it worked some 20 minutes later

@tom5677 commented on GitHub (Apr 14, 2026): It's a bit wired. Without changing anything it worked some 20 minutes later

BreizhHardware commented

2026-05-06 12:31:54 +02:00

Author

Owner

@maziggy commented on GitHub (Apr 15, 2026):

You'll run into troubles again for sure.

@maziggy commented on GitHub (Apr 15, 2026): You'll run into troubles again for sure.

BreizhHardware referenced this issue

2026-05-06 12:35:07 +02:00

[PR #783] [CLOSED] v0.2.2.1 #1110

BreizhHardware referenced this issue

2026-05-06 12:35:07 +02:00